The Joral J1939 incline sensor (3 axis inclinometer) is packaged as a dual module which communicates angular position on via J1939 CAN Bus or varying voltage (analog). Solid-state microchip technology allows true position sensing regardless of orientation to programmed zero. J1939 standard message contains angular position for X, Y, and Z. Each axis has its own independent current value. The sensor can be mounted to fit the requirements of the application, installed orientation does not influence output.
The DINC is offered standard in ABS Plastic, or in a aluminum housing, with a variety of connector options M12 – Male, M12 – Pigtail – Male, Flying Lead Cable, Shielded Flying Lead Cable, Deutsch 4 or 6 Pin.
This J1939 output device is an IP69K rated instrument with the robust MILSPEC 202 rating for shock and vibration! In wet, dry, dirty, cold or hot environments, the DINC delivers accurate feedback for your heavy machinery.
The Innovative J1939 DINC is also customizable. Contact Joral with your challenging application demands! Also check out the similar SINC single module incline sensor.
Housing Material
Red Aluminum
Anodized for corrosion resistance
Measuring Angle
360º x, y, and z
Dual sensors main unit and boom
Height
25.4mm (1.0")
Mounting
Tabs w/ 4.75mm diameter holes (0.187")
Weight Dual Unit Master
Master 3.0 oz
Slave2.0 oz
Input
INC
(90 mA)
Output
J1939
Electrical Protection
Over-Voltage, Reserve-Voltage, Output Short-Circuit Protected
Connection Type
M12 - Male, M12 - Pigtail - Male, Flying Lead Cable, Shielded Flying Lead Cable, Deutsch 4 - Pin, Deutsch 6 - Pin
LED Indicators
Yes
For power and communication
Resolution
0.1°
Absolute Accuracy
± 0.3°
At 25° C
Temperature Drift
± 0.3°
across specified operating temperature limits
Diagnostic LEDs Displays
Yellow / Red status LED
LED indicator shows different modes. Internal diagnostics; module performs a number of self-checks that improve safety
Processor
32-bit (144 MHz)
Computational capacity allowing for high speed control loops
Software
IQANdesign Platform
Signals can be selected and the parameters configured using IQAN software
Other
Real-time clock (RTC)
Data logging functions
Operating Temperature Range
−40°C to +80°C
Storage Temperature Range
−40°C to +90°C
Shock
400g/6ms (MIL STD 202)
Resists mechanical shock, vibration, temperature, and contaminants
Humidity
100%
Protection Class
IP69k
Vibration
5 to 3000 Hz, 20g (MIL STD 202)
Resists mechanical shock, vibration, temperature, and contaminants
Use our quick quote request or contact us to have one of our sales team help you with custom options.
Contact Us
