J1_Shafted_Banner

LP30 | PRODUCT TECHNICAL SPECIFICATIONS AND DOWNLOADS

Non-contact_Linear_Position_LP30

Incremental Non-contact Linear Transducer

IP69K, Up to 1/2" Air Gap Between Sensor/Track

  • J1939 CAN Bus incremental or absolute linear
  • Non-contact with wide sensing range
  • Compact housing for simple integration
  • MILSEPC 202 rating for shock and vibration
  • 1/4" to 1" resolution standards
  • - Custom resolution and magnet assemblies available
  • Intelligent and rugged replacement to
    wire-reel/string-pot boom measure systems

Browse the Quick View section to find instant specifications, order information, and dimensioned drawings. Information found in the Quick View is available in PDF format for direct download.

Technical data and dimensioned drawings
found in quick view tabs can be downloaded by clicking the PDF page icons below under Download Fast Links. Data sheets and downloads can also be found on the Data & Downloads section of the Joral, LLC webpage.

Quick View | SELECT TABS BELOW TO QUICK VIEW TECH ITEMS

Operating Characteristics|ELECTRICAL, MECHANICAL AND ENVIRONMENTAL SPECS

  • Outputs A - 1939 J1939, Addressable, Incremental position
    Input Power 6 to 30 VDC (30 mA)
    Electrical Protection Over-voltage, reserve-voltage, output short-circuit protected
    LED Indicators Power, J1939 communication status
    Connections M12, M12 Pigtail, Flying Lead Cable, Shielded Flying Lead, or Deutsch - 4 or 6 pin
    Resolution 1/2" or 1/4" (custom resolution packages available, contact Joral)
    Housing Diameter 30mm
    Housing Material Aluminum or Stainless Steel (corrosion resistant)
    Housing Height 1.2" (30.5mm) body; 1.86" (47.2mm) w/ M12 connector
    Mounting 30mm thread (standard proximity switch thread style)
    Weight 1.0 oz w/o mounting nuts; 2.2 oz w/ recommended mounting nuts
    Magnet strip/sensor gap* Standard 0.5"
    Operating Temperature -40° to +80° C
    Storage Temperature -40° to +90° C
    Humidity 100%
    Shock 400g/6ms (MIL STD 202)
    Vibration 5 to 3000 Hz, 20g (MIL STD 202)
    Protection Class IP69K (connection dependant)

Ordering Guide | PART NUMBER BUILD CHART AND SPECIAL P/N INFORMATION


To build Joral P/N first start with Housing Style [Code 1], MagElec or Output [Code 2], and Connection Code [Code 3].

Add Special Codes or Modifiers [code 4] to the end of the Joral P/N. If no unique modifier is used sensor is built to standard specifications. Unique modifiers override standard specification.

It does not matter if modifier listed is same as standard build (such as listing redundant modifier 51, red aluminum, for PE30; example PE30-1939-M12-51).

P/N
Examples

  • J1939: [HOUSING]-A-J1939-[CONN.]-[MODIFIERS]
  • Voltage: [HOUSING]-[MAGELEC]-[ANGLE RANGE]-[VOLTAGE RANGE]-[...]-[...]

Click table to enlarge view

Click here to close

Enlarged View |Maximize browser window for best viewing results

Code 1:
Housing Style
Code 2:
MagElec (Sensor Output)
Code 3:
Connection
Code 4:
Special Codes
LP30

LP30 = Red Aluminum, for 1/2" extended thread add 61 to end of P/N. Increases total shell body by 1/2"

A-1939 J1939, Addressable, Incremental Signal M12 Pluggable terminal block 51 Red Aluminum
  M12P M2 male on 18" pigtail 53 Black Aluminum
* More outputs & connections
available, contact Joral
if desired configuration
is not listed
CXX Flying lead cable (XX=inches) 54 Stainless Steel
LP30 Modifier Stainless Steel - Special Code 54
Code 54 for stainless steel corrosion resistant housing 30mm non-contact
SCXX Shielded cable (XX=inches) 61 Extended Thread
DE4 DT04 - 4 pin male Deutsch  
DE6 DT04 - 6 pin male Deutsch
Click here to close

Enlarged View |Maximize browser window for best viewing results

  • LP30 Non-contact Linear |FULL SIZE DRAWING - FOR PRINT DOWNLOAD DWG FLIER OR TECH CUT PDF

  • LP30 Non-contact Linear Position Sensor Dimensioned Drawing