J1_Shafted_Banner

HP38 | PRODUCT TECHNICAL SPECIFICATIONS AND DOWNLOADS

HP38_Noncontact_Rotary

38mm OEM Based IP69K Non-contact Rotary

Absolute Single-turn, Multi-turn or Incremental Encoder

  • OEM driven solution with minimum order quantities
  • Compact bare bones non-contact rotary encoder
  • - Body only 0.69" (17.5mm) tall
  • Patented true non-contact position sensing
  • - 0.5" (12mm) gap between sensor and application
  • - 0.10" (2.5mm) center alignment
  • - 30° planar tilt
  • LED indicators for power and output feedback
  • Incremental or absolute position
  • Outputs: Quadrature, SSI, Analog, & J1939 Can Bus

Browse the Quick View section to find instant specifications, order information, and dimensioned drawings. Information found in the Quick View is available in PDF format for direct download.

Technical data and dimensioned drawings
found in quick view tabs can be downloaded by clicking the PDF page icons below under Download Fast Links. Data sheets and downloads can also be found on the Data & Downloads section of the Joral, LLC webpage.

Quick View | SELECT TABS BELOW TO QUICK VIEW TECH ITEMS

Operating Characteristics | ELECTRICAL, MECHANICAL AND ENVIRONMENTAL SPECS

  • Outputs B - PPR - SEPP Incremental 10 bit Quadrature w/ Single Ended Output | A B Z
    B - 1939 J1939 10 bit @ 512 positions
    B - PWM PWM absolute position
    B - SSI1 SSI absolute position @ 512 positions
    V1 Voltage output / 5 VDC IN, 0-5 VDC OUT
    V2 Voltage output / 6-36 VDC IN, 0-5 VDC OUT
    Input Power 6 to 30 VDC at approx 60 mA max, not including output loads
    Electrical Protection Over-voltage, reserve-voltage, output short-circuit protected
    LED Indicators Power and output channels
    Connections M8, M12 Pigtail, Terminal Block, Flying Lead Cable, or Deutsch (4 or 6 pin)
    Resolution 0.3°
    Repeatability 0.30%
    Nonlinearity <1%
    Housing Diameter 38mm
    Housing Material Black Delrin™ (standard)
    Housing Height 0.69" (17.5mm) body
    Mounting 32mm (.884) spacing w/ 4mm diameter screws
    Weight 1.3 oz
    Magnet/sensor gap* Standard 0.5" (12mm) (Max w/ custom mag assembly up to 1" [30mm])
    Rated planer tilt/axial gap* Planar 30° (Max 45°) / Axial 0.1" (2.5mm)(Max 0.16" [4mm])
    *Non-contact tolerances rated using MAGH-RING 1/4x20 magnet accessory.
    Speed 3000 RPM max
    Operating Temperature -30° to +80° C
    Storage Temperature -40° to +90° C
    Humidity 100%
    Shock 400g/6ms (MIL STD 202)
    Vibration 5 to 3000 Hz, 20g (MIL STD 202)
    Protection Class IP69K (connection dependant)

Ordering Guide | PART NUMBER BUILD CHART AND SPECIAL P/N INFORMATION


To build Joral P/N first start with Housing Style [Code 1], MagElec or Output [Code 2], and Connection Code [Code 3].

Add Special Codes or Modifiers [code 4] to the end of the Joral P/N. If no unique modifier is used sensor is built to standard specifications. Unique modifiers override standard specification.

It does not matter if modifier listed is same as standard build (such as listing redundant modifier 51, red aluminum, for PE30; example PE30-1939-M12-51).

P/N
Examples

  • Quadrature: [HOUSING]-[BIT CODE]-[PPR]-[DRIVER]-[CONN.]-[MODIFIERS]
  • J1939: [HOUSING]-A-J1939-[CONN.]-[MODIFIERS]
  • Voltage: [HOUSING]-[MAGELEC]-[ANGLE RANGE]-[VOLTAGE RANGE]-[...]-[...]

Click table to enlarge view

Click here to close

Enlarged View |Maximize browser window for best viewing results

Code 1:
Housing Style
Code 2:
MagElec (Sensor Output)
Code 3:
Connection
Code 4:
Special Codes
HP38

HP38 material black Delrin™, connector orientation SIDE EXIT. For REAR EXIT CONN on HP38 add code 33 to end of P/N

B-[PPR]-SEPP 10 bit single ended quadrature - A B Z TRM Pluggable terminal block 31 Side Exit (Housing Wall)
B-1939 10 bit J1939 @ 512 positions M8 M8 male 33 Back Exit (Epoxy Side)
B-PWM Absolute position PWM M12P M2 male on 18" pigtail 71 Roller
A-SSI Absolute SSI @ 512 positions CXX Flying lead cable (XX=inches) 72 Spindle
* More outputs & connections available, contact Joral
if desired configuration
is not listed
V1 5 VDC IN,
0-5 VDC out
SCXX Shielded cable (XX=inches)  
V2 6-36 VDC IN,
0-5 VDC out
DE4 DT04 - 4 pin male Deutsch
  DE6 DT04 - 6 pin male Deutsch
Click here to close

Enlarged View |Maximize browser window for best viewing results

Special Part Number Information
CODE 1: Housing Style
Modifier 33 - For BACK EXIT connector orientation on HP38 add 33 to end of Joral P/N
HP38 - Handles ALL back exit and CABLE ONLY side exit connections
CODE 2: MagElec
B - _ _ _ _ - SEPP


  • Enter Quadrature PPR
    in place of _ _ _ _
  • B = 10 bit PPR
  • Available 10 bit PPR:
    0032,0064,0128,0256
B - 1939

  • 10 bit J1939 output is 512 positions
  • B = 10 bit
V1, V2 and I1
(Analog MagElec P/N Guide)

  • First select MagElec Code, then Angle Range, Voltage Range, and Signal Direction
  • Mag Codes: V1, V2, I1
  • Angle Ranges (A1-A2): 0-360° to 1° increments
  • Voltage Ranges (VR1-VR2): Selectable upper and lower limits, 0.1 unit increments
  • PART NUMBER FORMULA -
    (MagElec)-(A1-A2)-(VR1-VR2)-(CW/CCW)
  • EXACT V1, V2, I1 EXAMPLES
    (MagElec)-(A1-A2)-(VR1-VR2)-(CW or CCW)
CODE 3: Connections
  • All Outputs, All Connections - Stamdard cpmmectopm proemtatopms SIDE EXIT. For BACK EXIT connection on HP38 add 33 to end of Joral HP38 P/N.
  • J1939 Output - Addressing via varying value resistor in connection requires at least five conductors
    (M12, DE6, and Cables are J1939 addressing compatible)
  • All Outputs w/ Deutsch = DE4 and DE6 connection Deutsch connectors add $20 to HP38 list
Click here to close

Enlarged View |Maximize browser window for best viewing results

  • HP38 Non-contact |FULL SIZE DRAWING - FOR PRINT DOWNLOAD DWG FLIER OR TECH CUT PDF

  • HP38 Non-contact Position Sensor Dimensioned Drawing